Gotham GRSF L_YK MOUNTING FRAME Manual de usuario descargar pdf (Pagina 2)

CJ520404 Rev. C

8/10 2 of 2

Non-Flexible Wiring Method

If non-flexible wiring method is used, follow

procedure for flexible wiring method. Then

lower mounting frame equal to the thickness

of the finished ceiling or slightly above as

shown in Figure 4.

3. Remove knockouts on junction box to feed

power supply to fixture as shown in Figure 5.

Supply wire must meet applicable electrical

codes and be rated for a minimum for 90°C.

Junction box is thru-wire rated for 8-No. 12

AWG conductors (4in-4out).

4. Complete necessary splices. Snap the door

onto the junction box as shown in Figure 5. If

the ballast is desired on the opposite side of

the junction box, pass the entire door and

ballast assembly through the junction box

and snap into place.

5. Drop socket housing assembly through

mounting frame opening.

Figure 4

Ceiling

Mounting

Frame

Reflector

Junction Box

Figure 5

INSTALLATION INSTRUCTIONS - GRSF L/YK MOUNTING FRAME

1 2

Sin comentarios

Gotham GRSF L_YK MOUNTING FRAME Manual de usuario Pagina 2